BBDRM - MOBIL AERO HFA
- MSDS: BBDRM
- Manufacturer: MOBIL OIL CORP
- Product Name: MOBIL AERO HFA
- National Stock Number: 9150-00D000994
Product Identification
Product ID:MOBIL AERO HFA
MSDS Date:01/01/1987
FSC:9150
NIIN:00D000994
MSDS Number: BBDRM
Responsible Party
Emergency Phone: 212-883-4411
Cage: 34728
Contractor
Cage: 34728
Ingredients
MINERAL OIL (REFINED)
Fraction By Weight: >85%
ACGIH TLV: 5 MG/CUM(MIST)
ADDITIVES
Fraction By Weight: <15%
Hazards
Effects of Overexposure:SLIGHT EYE IRRITATION. MODERATE SKIN IRRITATION
First Aid
First Aid:EYE CONTACT:FLUSH W/PLENTY OF WATER FOR 15 MINUTES. GET MED
ATTN. SKIN CONTACT: WASH W/SOAP & WATER. RMV & LAUNDER CONTAMINATED
CLOTHING. INGESTION:DO NOT INDUCE VOMITING. ADMINISTER VEGETABLE
OIL. GE T MED ATTN.
Fire Fighting
Flash Point:205F,96C (CO)
Lower Limits:0.6
Upper Limits:7.0
Extinguishing Media:CO*2,FOAM,DRY CHEM,WATER FOG
Fire Fighting Procedures:USE SCBA & PROTECTIVE CLOTHING
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:ABSORB ON INERT MATL. SHOVEL & DISPOSE
Handling
Handling and Storage Precautions:AVOID CONTACT WITH SKIN. STORE AWAY
FROM HEAT & FLAME.
Other Precautions:WASH SKIN CONTACT AREAS WITH SOAP & WATER. AVOID
PROLONGED INHALATION OF MISTS OR VAPORS. EMPTY CONTAINERS MAY
CONTAIN PRODUCT RESIDUE, INCLUDING FLAMMABLE OR EXPLOSIVE VAPORS.
Exposure Controls
Respiratory Protection:NO SPECIAL REQUIREMENTS UNDER ORDINARY
CONDITIONS OF USE.
Ventilation:MECHANICAL (GEN) RECOMMENDED
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:RUBBER APRON, EYE BATH
Supplemental Safety and Health
MSDS SUBMITTED BY SKINNER VALVE DIV OF HONEYWELL WHO USE THIS MATL AS
ASSEMBLY AND TEST MEDIA FOR THEIR HIGH PRESSURE VALVES. MSDS DATED
12/2/85.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:450F,232C
Vapor Pres:<1
Spec Gravity:0.876
Viscosity:79 SUS @ 100F
Solubility in Water:NEGLIGIBLE
Appearance and Odor:RED LIQUID WITH MILD HYDROCARBON ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:HEAT,SPARKS,OPEN FLAMES & BUILD UP OF
STATIC ELECTRICITY.
Hazardous Decomposition Products:CARBON MONOXIDE
Disposal
Waste Disposal Methods:DISSOLVE WASTE IN A SOLVENT AND INCINERATE I/A/W
ALL LOCAL,STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.